Skip to main content
Protecta

Our Products

We are a market leader of fire rated products and offer an extensive range of penetration and linear gap seals. Our products provide an effective and efficient firestopping solution to enable greater fire protection in buildings around the world. All of our products are thoroughly tested and complete with supporting documentation to ensure fire safety compliance.

products range
  • Protecta Fire Rated Acrylic

    FR Acrylic

    FR Acrylic is a fire rated sealant designed to prevent the spread of fire and smoke through joints and openings in fire rated walls and floors.
  • Protecta Fire Rated Graphite

    FR Graphite

    FR Graphite is a high specification mastic designed to prevent the spread of fire, smoke and gases through openings in fire rated walls and floors.
  • Protecta Fire Rated IPT

    FR IPT

    FR IPT is designed for sealing joints, voids or irregular holes in walls, partitions and other structures, resulting in an airtight and watertight seal.
  • Protecta Fire Rated Adhesive

    FR Adhesive

    Fire Rated Adhesive contains a water-based inorganic polymer and filler and is designed to withstand temperatures greater than 1200 °C.
  • Eco-Foil System

    Eco-Foil System

    The Eco-Foil product system is a cost effective and efficient solution designed to reduce environmental impact and waste on construction sites.
  • Protecta Thermal Fire Rated Backing

    Mineral Fibre BIO

    Mineral Fibre BIO is made from special alkaline silicate (AES) fibres that are uniquely designed to provide benefits in high temperature insulation applications.
  • Fire Rated Board

    FR Board

    FR Board is designed to prevent the spread of fire through openings in walls and floors where openings are formed to allow the installation of multiple services.
  • Partition Wall

    FR Board Partition Wall

    Protecta FR Board as a partition wall is a easy to install and flexible solution for dividing buildings into fire compartments, preventing the spread of fire and smoke.
  • FR Membrane Barrier

    FR Membrane Barrier

    Protecta FR Membrane Barrier is a reliable, fire-tested solution for compartmentalising roof cavities, delivering up to EI 60 fire resistance
  • Protecta Ex Mortar

    EX Mortar

    EX Mortar is a dry, white powder which consists of inorganic components and perlite which form a fire sealing compound to prevent the spread of fire.
  • Fire Rated Interior Paint
    This product has multiple variants. The options may be chosen on the product page

    Interior Paint FR-1

    £4.00 Interior Paint FR-1 is a decorative fire-resistant, non-toxic and emission-free paint certified to BS EN 13501-1 Class B s1 d0 for use inside commercial buildings.
  • Raised Access Floor Barrier

    Raised Access Floor Barrier

    The Protecta FR Board Raised Access Floor (RAF) Barrier is a high-performance fire-stopping solution designed to restore fire compartmentation in underfloor voids.
  • Fire Rated Interior Paint
    This product has multiple variants. The options may be chosen on the product page

    Steel Paint FR-1

    £4.00 Steel Paint FR-1 is an acrylic-based paint that provides up to 60 min of fire protection on load-bearing steel structures that typically do not require primer or topcoat.
  • Steel Paint FR-120
    This product has multiple variants. The options may be chosen on the product page

    Steel Paint FR-120

    £4.00 Protecta Steel Paint FR-120 is a single component acrylic paint, used for up to 120 minutes fire protection of loadbearing structural steel that normally requires no primer, no top coat, is easy to use and very easy to clean up.
  • Protecta Waterproofer

    Waterproofer

    Waterproofer is a high viscosity cream-like impregnating fluid based on alkyl-alkoxy-silanes which protects surfaces by making them water repellent.
  • fire rated coating

    FR Coating

    FR Coating is a spray grade ablative sealant coating designed to enhance, seal and fire protect mineral fibres with added preservatives to resist microbial attack.
  • Protecta Service Coat fire rated

    Service Coat FR-1

    Service Coat FR-1 is an acrylic based intumescent coating, designed to increase the fire resistance of fire seals. It also protects cables, cable trays and metal pipes.
  • fire rated collar
    This product has multiple variants. The options may be chosen on the product page

    FR Collar

    Price range: £8.00 through £88.00 FR Collar is designed to maintain the fire resistance of fire rated walls and floors where these are breached by service penetrations.
  • Fire Rated Pipe Wrap

    FR Pipe Wrap

    FR Pipe Wrap is designed to maintain the fire resistance of fire separating walls and floors when these are breached by plastic pipes, conduits or metal pipes.
  • Protecta Fire Rated Damper

    FR Damper

    FR Damper is designed to fire proof ventilation ducts which penetrate fire rated constructions, such as fire compartments and fire walls.
  • Protecta FR Service Transits

    Service Transits

    Our Service Transits are designed to maintain the fire resistance of walls and floors breached by continuous cables and plastic pipes.
  • fire rated putty pad

    FR Putty Pad for Electrical Sockets

    FR Putty Pad for electrical switches and sockets is an easy to fit, fire and sound rated sealant supplied as non-setting putty.
  • Fire Rated Putty Pad

    FR Putty Pad for Tap Water Wall Boxes

    FR Putty Pad for tap water wall boxes is an easy to fit, fire and sound rated sealant supplied as non-setting putty for installing in dry lining partitions.
  • fire rated putty cord

    FR Putty Cord

    FR Putty Cord is an easy to apply fire and sound rated sealant, supplied as a non-setting putty cord. It is hand workable, reusable and re-serviceable.
  • Protecta Fire Rated Graphite Plate

    FR Graphite Plate

    FR Graphite Plate is an intumescent plate used to reinstate the fire performance of flexible wall constructions when punctured with plastic wall boxes.
  • Fire Rated Foam

    FR Foam

    FR Foam provides excellent thermal properties and is designed to maintain the fire resistance in walls by filling linear gaps in drywalls, concrete or masonry walls.
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.